- Make sure this fits by entering your model number.
- Fits Arizona Mist, Misty Mate Cool Patio System, and most outdoor mist systems
- Minimal water use of 1/2 gallon of water per hour per nozzle @ 60 psi
- HIGH Quality Brass and Stainless Steel construction with “O” ring attached + FREE FREE FREE extra set of “O” rings! – a $7 Value FREE!
- 012 Orifice; 10/24 Threads
- Only available from Cz Garden Supply (TM), USPTO and Amazon Brand Registry Protected
The Brass and Stainless Steel Mist Nozzle is the most efficient and water conservative mist nozzle available today. It only uses one half gallon per hour per nozzle @60 psi and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Nozzle information – The nozzles contain a 10/24 thread with a .012 (twelve thousandths) orifice. It is a three piece nozzle with a brass body and a stainless steel orifice and a stainless steel cylinder within the nozzle. The nozzle will have a cone shape spray pattern of approximately 75 degrees (at 70 p.s.i.) and should obtain complete evaporation when mounted at least 8 feet off the ground (This assuming 95 + degrees with 0% – 20% humidity). The nozzles themselves have been tested between 45 and 1000 psi. Nozzles require a minimum of 25 psi. 0.012 Nozzle: This nozzle will emit approximately .460 gallons per hour at 60 p.s.i., 0.720 gallons per hour at 150 p.s.i., 1.60 gallons per hour at 1000 p.s.i. Tip: Use a Calcium Filter to prevent clogging. Nozzles can also be soaked in CLR or vinegar to remove mineral deposits that can cause clogging.